Arista 7280R3 Series

Arista 7280R3 Series Technical Specifications

The Arista 7280R3 series is a set of purpose built 100/400G fixed configuration 1RU and 2RU systems designed for the highest performance environments such as Cloud DC, Content Delivery, IP storage, Enterprise leaf and spine networks and Data Center Interconnect and IP Peering.

Wire speed L2 and L3 forwarding are combined with advanced features for network virtualization, open monitoring and network analysis, resiliency and architectural flexibility with deterministic performance. Deep packet buffers and large routing tables allow for Internet peering applications and the broad range of interfaces and density choice provides deployment flexibility.

All Arista 7280R3 Series support FlexRoute™ engines providing the scalability to support deployment as a routing platform with Internet scale routing. Arista FlexRoute along with EOS NetDB™ enables innovations and convergence not natively available in merchant chipsets. The 7280R3K Series supports a series of flexible profiles that leverage common resources for different network roles including up to 5M IP routes.

7280R3 Benefits

• Standards-based high density 400G and 100G switches ideal for future proof designs and high bandwidth needs such as in High Performance Storage or Content Delivery Networks (CDNs)
• Dynamic deep buffers in a fixed form factor makes for an ideal spine switch where lossless performance and in-cast traffic is a concern such as in data analytics and IP storage
• Directly connected 40G and 50G attached storage systems, requiring high performance and predictable latency
• Streaming network state for advanced analytics with CloudVision®
• Network–wide virtualization platform for next generation cloud bursting with wire-speed VXLAN routing
• Hardware assisted PTP enables accurate timing solutions across Ethernet based networks without costly investment in separate timing networks
• Unique monitoring and provisioning features – LANZ, DANZ, AEM, IEEE 1588 PTP, ZTP, VM Tracer, VXLAN, and eAPI
• Comprehensive L2 and L3 feature set for open multi-vendor networks with no proprietary lock-in
• Accelerated sFlow and IPFIX for network forensics
• Large scale L2 and L3 table resources allow deployment flexibility in both large L2 and L3 environments with any-workload suitability
NEBS compliance and DC power supplies designed for service provider environments

Arista 7280R3 Series

400G 7280PR3 Series and 7280DR3 Series	400G 1RU and 2RU systems High Density 400G ports with OSFP or QSFP-DD for flexible 100G, 50G and 400G support Maximum of 192 ports of 50GbE or 96 ports of 100G Up to 9.6Tbps of wire speed performance with 16GB of ultra deep and dynamic buffers Over 2M IPv4/v6 routes with FlexRoute Over 5M IPv4/v6 routes with the 7280PR3K and 7280DR3K Series and FlexRoute Scalable Accelerated sFlow on all models
7280CR3 Series	100G 1RU and 2RU systems with a choice of port combinations with QSFP100 optics and cables Up to 96 ports of 100G in 2RU and 48 ports in 1RU Flexible interface combinations for 10/25/40/50/100G and 400G Up to 9.6Tbps of wire speed performance with 16GB of buffer Over 2M IPv4/v6 routes with FlexRoute Over 5M IPv4/v6 routes with the 7280CR3K Series and FlexRoute Scalable Accelerated sFlow on all models
7280SR3 Series	25G 1RU systems with a choice of 1/10/25G port combinations on SFP optics and cables Up to 48 ports of 25G in 1RU with 8 ports of 100G Flexible interface combinations for 10/25/40/50 and 100G Up to 2.4Tbps of wire speed performance with 8GB of buffer Over 2M IPv4/v6 routes with FlexRoute Over 5M IPv4/v6 routes with the 7280SR3K Series and FlexRoute Scalable Accelerated sFlow on all models

Scalability:

Each 7280R3 Series system delivers a consistent set of features supporting layer 2 and layer 3 data center designs with predictable and linear scaling. Arista's FlexRoute Engine enables full Internet routing coupled with support for a variety of IP/MPLS/VXLAN protocols.

Entry level 7280R3 platforms such as the 7280SR3-40YC6 provide platform specific scaling profiles as detailed in the table below:

¹ Undimensional scaling maxima with currently available MDB profiles. Available resources depend on user configuration.

Arista 7280R3 Series Comparisons

The following tables compare Arista 7280R3 Series models. For a complete catalog of Arista 7000 Series switch specifications click here.

7280R3 100G/400G Systems

7280R3 25G/100G Systems

 * Not yet supported in EOS

MACsec from 1-100G

Implementing cost effective and high performance bulk data encryption at scale is a major challenge for today’s cloud datacenters and interconnect providers. The Arista 7280R3 MACSec systems are high performance, high port density, 1RU switch-routers with built-in wire speed encryption, designed to meet the needs of the largest scale datacenters.

The 7280R3 MACSec systems utilize proven, standards based encryption technology (IEEE802.1AE MACsec) to provide secure communication for links between tiers in leaf and spine datacenter designs, data center interconnects (DCI), overlay networks and virtualized or traditional enterprise networks.

Arista 7280R3 MACsec series comparisons

The following table compares Arista 7280R3 MACsec series models.

Scalability:

Each 7280R3 Series system delivers a consistent set of features supporting layer 2 and layer 3 data center designs with predictable and linear scaling. Arista's FlexRoute Engine enables full Internet routing coupled with support for a variety of IP/MPLS/VXLAN protocols.

¹ Undimensional scaling maxima with currently available MDB profiles. Available resources depend on user configuration.

Literature

• .7280R3 Quick Look
• .7280R3 Datasheet
• .7280R3 MACsec Datasheet
• .Arista 7280R3 Switch Architecture White Paper
• .400G Q&A
• .R3 Innovations White Paper
• .FlexRoute
• .Universal Cloud Network
• .Quick Reference Guide
• .EANTC 2020 EVPN and SR Interoperability Report
• .Leviton - 400G cabling
• .Fixed Config Switches Visio Stencils